Coil Offcuts
Coil offcuts are a natural result of the uncoiling and cutting process: the start and end sections of each coil, in irregular sizes. Thickness 2–25 mm, grades S235, S355, DC01, DC04, 2nd-grade (2A) stock. Sorted by thickness or in a full mix, sorting by grade available on request. Ready for collection ex-stock or dispatch within 24–48 hours.
Why choose us?
- Coil start and end sections from the uncoiling and cutting process
- Thickness 2–25 mm, grades S235, S355, DC01, DC04 (2A stock)
- Sorted by thickness or mixed, sorting by grade on request
- Ready for collection or dispatch within 24–48 hours
Dimensions & availability
Stock rotates with incoming mill batches, so we do not publish fixed dimension tables. State the dimensions (thickness × width × length), grade and tonnage in your enquiry and we will confirm availability and the parameters of the specific batch, with documentation.
Minimums, payment, lead times? See the FAQ
Gallery
Available steel grades
| Grade | Notes |
|---|---|
| S235JR | General structural steel. Good weldability, tensile strength 360–510 MPa. |
| S355J2 | Higher yield strength (355 MPa): bridges, cranes, machinery and load-bearing structures. |
| DC01 | Cold-rolled deep-drawing steel (1A and 2A). Used in automotive, appliances and enclosures. |
| DC04 | Higher formability than DC01, for deep-drawing and complex forming operations. |
| 2A (drugi gatunek) | Mill overproduction or customer-rejected stock. Mechanical properties in many cases meet normative requirements. Evaluated and documented per batch. Do not specify where EN 10204 3.1 certificate is mandatory without exception. |
Grade availability depends on current stock. Contact us for batch-specific documentation.
Ask about the steel you need
The offer will be sent to the e-mail address you provide.
Related products
Tell us what you need. We'll respond with a firm quote.
Mill surplus and 2A steel: mill pricing, documentation, delivery. No middlemen.